100% SATISFACTION GUARANTEE
Turn Tack-Room Wall Space Into Organized Saddle-and-Pad Storage
Easy-Up® Pro 3-Tier Saddle Rack with Pad Bars
The Problem
When Saddles and Pads Lack Assigned Places, Tack-Room Clutter Returns
It’s 6:15 on a busy lesson morning, and you’re standing in the tack room with your horse nearly ready at the cross-ties. The saddle you need is wedged behind two others, yesterday’s damp pad is folded over a trunk, and another pad has slipped onto the floor. You can hear the next rider coming down the barn aisle, but before anyone can tack up, you have to sort the pile and find a clean, dry setup.
Every serious horse owner knows how quickly a tidy tack space can unravel. English saddles and Western saddles take up real room; pads need a place to hang instead of being crushed beneath a seat or stacked while still damp. In a boarding barn, training facility, or lesson program, several people may reach for the same wall of equipment within an hour. Without a dedicated position for each saddle and pad, organization depends on everyone rebuilding the same unstable stack.
The cost shows up in small delays that repeat all week. You move one saddle to reach another, carry pads to a separate rail, and stop to clear the floor before sweeping. Tack gets crowded against tack, stirrup leathers and fenders become harder to separate at a glance, and damp pads stay bunched when they should be opened up. Your horse is left waiting while a routine part of the day turns into another barn chore, and the room never quite looks ready for the next ride.
The real problem isn’t a lack of effort. It’s a storage setup that asks three saddles and three pads to share space without giving each one a clear, supported place of its own. Until the rack itself matches the workload, clutter keeps returning.
Every serious horse owner knows how quickly a tidy tack space can unravel. English saddles and Western saddles take up real room; pads need a place to hang instead of being crushed beneath a seat or stacked while still damp. In a boarding barn, training facility, or lesson program, several people may reach for the same wall of equipment within an hour. Without a dedicated position for each saddle and pad, organization depends on everyone rebuilding the same unstable stack.
The cost shows up in small delays that repeat all week. You move one saddle to reach another, carry pads to a separate rail, and stop to clear the floor before sweeping. Tack gets crowded against tack, stirrup leathers and fenders become harder to separate at a glance, and damp pads stay bunched when they should be opened up. Your horse is left waiting while a routine part of the day turns into another barn chore, and the room never quite looks ready for the next ride.
The real problem isn’t a lack of effort. It’s a storage setup that asks three saddles and three pads to share space without giving each one a clear, supported place of its own. Until the rack itself matches the workload, clutter keeps returning.
Why It Keeps Happening
Scattered Tack Storage Adds Extra Steps Before and After Every Ride
The problem isn’t you, and it isn’t the people sharing your barn. Most tack rooms are expected to handle full-size saddles, bulky Western skirts, stirrups, girths, and damp pads with storage pieces that solve only one part of the job.
A single saddle arm may get one saddle off the floor, but it leaves the pad competing for a hook, rail, stall front, or nearby trunk. A freestanding rack can hold several saddles, yet it also claims floor space where you roll trunks, sweep shavings, or pass with an armful of tack. When storage is split across unrelated pieces, the system has no natural reset: the saddle goes one place, the pad goes another, and anything used during the rush lands wherever there is room.
Keep repeating that pattern and the inconvenience compounds. Pads are folded before they have had room to air, saddle positions change from day to day, and the piece you need is often behind the heaviest one in the room. In a shared facility, one hurried lesson or late-night ride can undo an afternoon of organizing. You spend more time lifting, shifting, and searching, while your horse stands ready and your actual ride time gets squeezed by a problem that should have been settled before you picked up the bridle.
That is the trap: adding another hook or another portable stand may create more storage, but not a more orderly workflow. Unless saddles and their matching pads have assigned, adjacent places, the barn keeps asking you to organize around the equipment instead of letting the equipment support the way you ride.
A single saddle arm may get one saddle off the floor, but it leaves the pad competing for a hook, rail, stall front, or nearby trunk. A freestanding rack can hold several saddles, yet it also claims floor space where you roll trunks, sweep shavings, or pass with an armful of tack. When storage is split across unrelated pieces, the system has no natural reset: the saddle goes one place, the pad goes another, and anything used during the rush lands wherever there is room.
Keep repeating that pattern and the inconvenience compounds. Pads are folded before they have had room to air, saddle positions change from day to day, and the piece you need is often behind the heaviest one in the room. In a shared facility, one hurried lesson or late-night ride can undo an afternoon of organizing. You spend more time lifting, shifting, and searching, while your horse stands ready and your actual ride time gets squeezed by a problem that should have been settled before you picked up the bridle.
That is the trap: adding another hook or another portable stand may create more storage, but not a more orderly workflow. Unless saddles and their matching pads have assigned, adjacent places, the barn keeps asking you to organize around the equipment instead of letting the equipment support the way you ride.
- ✗Saddles become harder to reach when tack is crowded together.
- ✗Pads end up folded, stacked, or carried to a separate storage spot.
- ✗Freestanding storage can occupy floor space needed for sweeping and moving tack.
- ✗Shared tack rooms are difficult to reset when equipment lacks assigned positions.
The Solution
Keep Each Saddle Close to Its Pad on a Wall-Mounted Steel Rack
The Easy-Up® Pro 3-Tier Saddle Rack with Pad Bars solves the problem by building saddle storage and pad storage into one wall-mounted steel unit. Three saddle supports are paired with three accompanying pad racks, so each setup has a clear vertical position instead of being split across the room. Mounting hardware is included: install the top bracket, slide the three saddle racks into place, then secure the bottom bracket.
Construction is anchored in published specs. The rack is made from heavy-duty gray armor-coated steel and measures 46 inches high, 9 inches wide, and 26.5 inches deep. Its listed 9-inch width keeps the storage column concentrated on a narrow section of wall. A 7-year warranty backs the rack.
For your horse, the benefit begins before the saddle reaches the back. Your chosen saddle can stay in its assigned spot, while the matching pad hangs below rather than being left folded in a heap. You can see the full setup at a glance, lift it in a familiar order, and return it to the same place after the ride. The rack is described for both English and Western saddles, making it practical when one tack room serves different riders or disciplines.
For you, that means fewer decisions in the busiest minutes of the day. Instead of rebuilding a stack or carrying pads to a separate rail, you have three defined saddle-and-pad stations on one narrow section of wall. The barn aisle stays easier to work through, the tack room has a repeatable reset, and the next ride starts with equipment where you expect it.
Easy-Up® Pro turns organization into part of the rack's construction, not another rule everyone has to remember. It is a durable, space-conscious choice for personal tack rooms, lesson barns, and training facilities, backed by a 7-year warranty and the equine expertise of a family business that has been Trusted since 1948.
Construction is anchored in published specs. The rack is made from heavy-duty gray armor-coated steel and measures 46 inches high, 9 inches wide, and 26.5 inches deep. Its listed 9-inch width keeps the storage column concentrated on a narrow section of wall. A 7-year warranty backs the rack.
For your horse, the benefit begins before the saddle reaches the back. Your chosen saddle can stay in its assigned spot, while the matching pad hangs below rather than being left folded in a heap. You can see the full setup at a glance, lift it in a familiar order, and return it to the same place after the ride. The rack is described for both English and Western saddles, making it practical when one tack room serves different riders or disciplines.
For you, that means fewer decisions in the busiest minutes of the day. Instead of rebuilding a stack or carrying pads to a separate rail, you have three defined saddle-and-pad stations on one narrow section of wall. The barn aisle stays easier to work through, the tack room has a repeatable reset, and the next ride starts with equipment where you expect it.
Easy-Up® Pro turns organization into part of the rack's construction, not another rule everyone has to remember. It is a durable, space-conscious choice for personal tack rooms, lesson barns, and training facilities, backed by a 7-year warranty and the equine expertise of a family business that has been Trusted since 1948.
🛡️
Paired Tack Organization
Tiered saddle supports and accompanying pad bars keep saddles and pads together in defined positions.
💧
English and Western Ready
The rack is designed to organize both English and Western saddles in personal or shared tack spaces.
📐
Durable Steel Construction
Heavy-duty gray armor-coated steel provides a sturdy structure for demanding barn environments.
🔧
Wall-Mounted Convenience
The vertical wall-mounted format keeps tack neat and off the ground while preserving usable floor space.
Product Details
What This Rack Brings to Your Tack Space
- Tiered storage for multiple saddles
- Accompanying bars for saddle pads
- Heavy-duty steel construction
- Gray armor-coated finish
- Wall-mounted vertical organization
- Compatibility with English and Western saddles
- Suitable for busy barns and personal tack spaces
Side by Side
Compare Three-Tier Saddle Storage Options
These three products organize multiple saddles, but their mounting formats, pad-storage features, dimensions, construction details, and published warranties differ. Information below reflects specifications listed by each retailer as of the date shown; unpublished details are marked “Not listed.”
| Feature | Schneiders Easy-Up® Pro 3-Tier Saddle Rack with Pad Bars | DuMOR 3-Tier Heavy-Duty Saddle Rack with Vented Blanket Rack | Partrade 3-Tier Saddle Rack (QGT1) |
|---|---|---|---|
| Installation format | Wall-mounted unit with top and bottom brackets | Freestanding rack | Freestanding rack with non-skid rubber feet |
| Saddle tiers | Three saddle racks | Three-tier design | Three-tier design |
| Pad or blanket storage | Three accompanying pad racks | One vented blanket rack | Not listed |
| Frame and finish | Heavy-duty gray armor-coated steel | 1½-inch powder-coated tubular steel frame | Powder-coated frame; base material not listed |
| Published overall dimensions | 46"H × 9"W × 26.5"D | 68.89"H × 30.3"L × 29.9"W | 65"H × 30"W × 30"D |
| Assembly information | Mounting hardware included; top bracket, three racks, and bottom bracket are installed in sequence | Assembly required; product page states no tools are required | Some assembly required |
| Published load rating | Up to 200 lb across the unit | 25 lb maximum per layer | Not listed |
| Tier adjustability | Rotation or removal not listed | Upper tiers are listed as removable and rotatable | Top two racks swivel 360° |
| Published warranty | 7 years | 1 year | Not listed |
Gray Armor-Coated Steel Built for Busy Barn Organization
Designed for busy barns, training facilities, lesson programs, and personal tack spaces, this rack combines tiered saddle storage with dedicated pad bars. Its wall-mounted format creates a repeatable place for English or Western saddles and their matching pads, while the gray armor-coated steel supports long-term barn use.
- ✓Tiered saddle supports
- ✓Dedicated saddle pad bars
- ✓Heavy-duty gray armor-coated steel
- ✓Suitable for English and Western saddles
- ✓Designed for easy wall installation
A Practical Fit for Lesson Barns, Training Facilities, and Personal Tack Rooms
Size: 3 Tier
Color: Gray Armor
The Takeaway
Store Saddles and Pads Together Instead of Across the Tack Room
This Schneiders rack gives saddles and pads dedicated vertical positions on a durable wall-mounted steel structure, helping busy equestrian spaces keep tack neat, accessible, and off the ground.
Ready to Order?
Create a Clear Home for Saddles and Pads
Bring durable, wall-mounted tack organization to your barn with the Easy-Up® Pro 3-Tier Saddle Rack with Pad Bars.
🚚 Free Shipping on $99+
↩️ Free Size Exchanges
🔒 Secure Checkout