4.9★ FROM 17+ VERIFIED RIDERS
Swing Saddle Pads Out for Easier Access From Either Side
Easy-Up® Pro Heavy Duty Swing Out Pad Rack brings wall-mounted, swiveling pad storage to tack rooms, grooming stalls, and horse trailers.
The Problem
When Saddle Pads Become an Awkward Stack
It’s 6:15 on a humid summer morning, and you’re standing in the tack room trying to find the clean square pad you set aside for today’s ride. One pad is folded beneath two Western pads, another is sliding from a saddle rack, and yesterday’s damp pad is still draped over a stall front. Your horse is waiting in the cross-ties while you lift, sort, and reshuffle gear that should have been ready to grab.
Every serious rider knows how quickly saddle pads take over a working barn. English pads, Western work pads, show pads, half pads, and blankets all need enough room to hang without becoming one heavy, awkward pile. Lean them against a wall and they slump onto the floor. Stack them on a shelf and the pad you need is inevitably at the bottom. Hang them over doors or gates and they compete with halters, sheets, and the equipment you use while caring for your horse. A few pads may seem manageable, but a regular riding schedule turns improvised storage into a daily obstacle.
The real cost shows up in small delays and repeated work. You spend extra minutes searching before a lesson, move pads whenever you need something underneath them, and carry damp gear farther than necessary after untacking your horse. In a trailer, loose pads can shift away from the place where you packed them. In a grooming stall, they consume the limited wall space needed for brushes, tack, and blankets. Even a tidy stack has to be disturbed whenever you reach for anything except the top pad. The problem isn’t simply owning too many pads. It’s trying to store wide, frequently used equipment on a system that does not move with your routine.
Every serious rider knows how quickly saddle pads take over a working barn. English pads, Western work pads, show pads, half pads, and blankets all need enough room to hang without becoming one heavy, awkward pile. Lean them against a wall and they slump onto the floor. Stack them on a shelf and the pad you need is inevitably at the bottom. Hang them over doors or gates and they compete with halters, sheets, and the equipment you use while caring for your horse. A few pads may seem manageable, but a regular riding schedule turns improvised storage into a daily obstacle.
The real cost shows up in small delays and repeated work. You spend extra minutes searching before a lesson, move pads whenever you need something underneath them, and carry damp gear farther than necessary after untacking your horse. In a trailer, loose pads can shift away from the place where you packed them. In a grooming stall, they consume the limited wall space needed for brushes, tack, and blankets. Even a tidy stack has to be disturbed whenever you reach for anything except the top pad. The problem isn’t simply owning too many pads. It’s trying to store wide, frequently used equipment on a system that does not move with your routine.
Why It Keeps Happening
Fixed Storage Can Leave the Pad You Need Buried
The problem isn’t you, and it isn’t your horse’s collection of riding gear. Saddle pads are broad, flexible, and often damp after work. They need accessible storage, yet most convenient surfaces in a barn were never designed to keep several pads separated, supported, and ready for the next ride.
A shelf creates a stack, which means lifting multiple pads to reach one underneath. A single fixed bar creates another stack, only hanging vertically. Stall fronts and gates may feel convenient until the pad slips, gets moved to open the door, or blocks equipment needed for your horse. Small hooks concentrate support in one spot instead of giving a large English or Western pad a long surface to rest across. The problem keeps repeating because each makeshift answer stores the pads without solving how you access them.
That cycle becomes especially frustrating during busy barn hours. You finish riding, remove a warm pad from your horse’s back, and need somewhere sensible to put it before grooming and turning out. Later, someone shifts it to reach a blanket. Before the next ride, you are sorting through the same pile again. In a horse trailer, the challenge is tighter: floor and aisle space matter, walls must work harder, and gear that cannot be secured may move while the trailer is underway. What began as a minor organization issue starts interrupting untacking, grooming, packing, and departure.
Eventually, you either accept the pile or keep adding storage pieces that use more space without improving access. You should not have to reorganize your tack room every time you switch from a schooling pad to a show pad. The better answer is storage built around the actual size of your pads and the way you move through your horse’s daily routine.
A shelf creates a stack, which means lifting multiple pads to reach one underneath. A single fixed bar creates another stack, only hanging vertically. Stall fronts and gates may feel convenient until the pad slips, gets moved to open the door, or blocks equipment needed for your horse. Small hooks concentrate support in one spot instead of giving a large English or Western pad a long surface to rest across. The problem keeps repeating because each makeshift answer stores the pads without solving how you access them.
That cycle becomes especially frustrating during busy barn hours. You finish riding, remove a warm pad from your horse’s back, and need somewhere sensible to put it before grooming and turning out. Later, someone shifts it to reach a blanket. Before the next ride, you are sorting through the same pile again. In a horse trailer, the challenge is tighter: floor and aisle space matter, walls must work harder, and gear that cannot be secured may move while the trailer is underway. What began as a minor organization issue starts interrupting untacking, grooming, packing, and departure.
Eventually, you either accept the pile or keep adding storage pieces that use more space without improving access. You should not have to reorganize your tack room every time you switch from a schooling pad to a show pad. The better answer is storage built around the actual size of your pads and the way you move through your horse’s daily routine.
- ✗Stacked pads must be shifted to reach the one underneath.
- ✗Pads draped over gates or stall fronts can occupy space needed for other equipment.
- ✗Loose pads can clutter the limited storage areas inside a horse trailer.
- ✗Floor-standing storage uses space that this rack instead puts on the wall.
The Solution
Give Each Pad a Welded Swing-Out Holder
The Easy-Up® Pro Heavy Duty Swing Out Pad Rack is built to turn an unused wall into accessible storage for five large English or Western saddle pads. Instead of placing every pad in one stack, the rack holds them across five welded holders. The assembly swivels 180 degrees, so you can swing your pads outward when you need access from either side, then move the rack back against the wall when you are finished. A 15-inch chain with adjustable clips and a snap connects to the wall bracket to help keep the rack positioned out of the way when it is not in use.
Its construction is specific to the demands of barn storage. Each 36-inch holder is welded to the swivel canister and made from 1-inch square steel tubing. The steel carries a protective Gray Armor rust-resistant finish, and the rack extends 36 inches from the wall when swung out for use. Mounting hardware is included, and the product is backed by a seven-year manufacturer warranty against breakage. These are practical details for equipment intended to become part of a working tack room, grooming stall, or horse trailer.
For your horse’s routine, that means the pad you want can have a consistent place before and after every ride. You can swing the rack out, select the English or Western pad needed for the day, and return the remaining pads toward the wall without rebuilding a pile. After untacking, the long holders give your horse’s pad a dedicated place instead of leaving it on the floor, over a gate, or underneath other gear. The rack keeps frequently used pads together while making each one easier to identify and reach.
You get a more orderly preparation area and fewer unnecessary steps between catching, grooming, saddling, and caring for your horse after work. Because the rack mounts to a wall and swings back when not needed, it makes existing barn or trailer space work harder without adding another floor-standing organizer. Built by horse lovers, for horse lovers, it is a straightforward solution designed around the equipment real equestrians handle every day.
Its construction is specific to the demands of barn storage. Each 36-inch holder is welded to the swivel canister and made from 1-inch square steel tubing. The steel carries a protective Gray Armor rust-resistant finish, and the rack extends 36 inches from the wall when swung out for use. Mounting hardware is included, and the product is backed by a seven-year manufacturer warranty against breakage. These are practical details for equipment intended to become part of a working tack room, grooming stall, or horse trailer.
For your horse’s routine, that means the pad you want can have a consistent place before and after every ride. You can swing the rack out, select the English or Western pad needed for the day, and return the remaining pads toward the wall without rebuilding a pile. After untacking, the long holders give your horse’s pad a dedicated place instead of leaving it on the floor, over a gate, or underneath other gear. The rack keeps frequently used pads together while making each one easier to identify and reach.
You get a more orderly preparation area and fewer unnecessary steps between catching, grooming, saddling, and caring for your horse after work. Because the rack mounts to a wall and swings back when not needed, it makes existing barn or trailer space work harder without adding another floor-standing organizer. Built by horse lovers, for horse lovers, it is a straightforward solution designed around the equipment real equestrians handle every day.
🛡️
Swing-Out Access
The rack swivels outward so English or Western saddle pads can be reached from either side.
💧
Wall-Saving Storage
Swing the rack back against the wall when it is not in use.
📐
Heavy-Duty Construction
Welded square steel tubing provides solid support for large saddle pads.
🔧
Protected Steel Finish
A protective rust-resistant finish helps suit the rack to working tack rooms, grooming stalls, and horse trailers.
PRODUCT DETAILS
What Comes With This Swing-Out Pad Rack
- Welded saddle pad holders
- Heavy-duty square steel tubing
- Protective rust-resistant finish
- Wall-mounted swiveling assembly
- Chain with adjustable clips
- Snap connection for the wall bracket
- Included mounting hardware
Side by Side
Compare Five-Pad Swing-Out Storage
Published specifications differ in arm movement, dimensions, construction details, included hardware, and warranty coverage. Information not stated on a cited product page is marked “Not listed” rather than inferred.
| Feature | Schneiders Easy-Up® Pro Heavy Duty Swing Out Pad Rack | Royal Wire Swinging 5-Arm Blanket Bar, Wall Mount | Equi Racks 5 Arm Wall Mount Blanket Pad Rack |
|---|---|---|---|
| Published storage capacity | Holds 5 large English or Western saddle pads | 5 swinging arms for blankets, saddle pads, or sheets | 5 free-moving swing arms for pads or blankets |
| Published arm movement | Rack swivels 180° and can be locked against the wall | 5 arms move independently and fold nearly flush with the wall | 5 free-moving swing arms; rotation range not listed |
| Published arm or reach dimension | 36-inch holders; extends 36 inches from the wall in use | Overall dimensions include 37-inch depth; arm length not separately listed | 31-inch swing arms |
| Published material and profile | Welded 1-inch square steel tubing | Material and arm profile not listed | Steel with 1-inch-diameter swing arms |
| Published finish information | Gray Armor protective rust-resistant finish | Finish properties not listed | Gray color; finish properties not listed |
| Included mounting hardware | Mounting hardware included | Mounting hardware not listed | Screws included |
| Published storage restraint | 15-inch chain with adjustable clips and snap connects to the wall bracket | Arms fold nearly flush; separate restraint not listed | Restraint or locking component not listed |
| Published installation locations | Tack room, grooming stall, or horse trailer | Wall-mounted tack-room storage | Wall or horse trailer |
| Published warranty | 7-year manufacturer warranty against breakage | Product warranty not listed | Product warranty not listed |
Built Around the Size and Handling of Saddle Pads
Each welded holder gives a large English or Western saddle pad its own supported place. The wall-mounted assembly swings outward for access and returns against the wall afterward. A chain with adjustable clips and a snap connects to the wall bracket to help keep the rack out of the way when it is not in use. Mounting hardware is included.
- ✓Wall-mounted swing-out design
- ✓Welded square steel tubing
- ✓Protective rust-resistant finish
- ✓Chain with adjustable clips and snap
- ✓Mounting hardware included
Why the Swiveling Wall-Mount Design Fits a Working Barn
Warmth: Default Title
Size:
Color:
THE TAKEAWAY
A Wall-Mounted Home for Large English or Western Pads
This Schneiders rack keeps saddle pads together on welded holders, swings outward for access, and returns against the wall when storage space needs to stay clear.
Ready to Order?
Turn Open Wall Space Into Dedicated Saddle Pad Storage
View the product details and availability for Easy-Up® Pro Heavy Duty Swing Out Pad Rack.
🚚 Free Shipping on $99+
↩️ Free Size Exchanges
🔒 Secure Checkout