4.3★ FROM 22+ VERIFIED RIDERS
Keep Hay Contained While Encouraging a More Unhurried Meal
Easy-Up® Safety First Corner Hay Rack
The Problem
When Dinner Ends Up Scattered Through the Stall
It’s 6:00 in the evening, and you’re making one last pass down the barn aisle before heading home. Your horse has pulled part of dinner into the bedding, scattered stems beneath the water bucket, and left a loose pile where clean hay and stall debris are already mixing. You pause with the fork in your hand, deciding what can be saved and what has to be thrown away. It’s a familiar end to a long day: more cleanup for you and a less orderly feeding space for your horse.
The same routine can play out every morning. You carry hay into the stall, place it where your horse can reach it, and hope most of it stays together long enough to be eaten. Instead, loose flakes can be nosed around, stepped into, or worked across the floor as your horse sorts through each mouthful. A basic open rack may contain the hay, but wide access can still let your horse pull out a large section at once. A floor pile offers easy access, yet it also leaves every stem exposed to bedding and stall traffic.
The cost is bigger than a few minutes with a manure fork. Hay that ends up mixed into the stall adds to the amount you sweep, strip, and replace. Refilling too often interrupts the rhythm of feeding and makes it harder to see how much hay your horse has actually consumed. You want a setup that respects your horse’s natural tendency to eat over a longer period without turning each meal into another barn chore. The real challenge is finding a rack that contains a practical serving, moderates access, fits neatly into the stall, and avoids harsh exposed edges around your horse.
The same routine can play out every morning. You carry hay into the stall, place it where your horse can reach it, and hope most of it stays together long enough to be eaten. Instead, loose flakes can be nosed around, stepped into, or worked across the floor as your horse sorts through each mouthful. A basic open rack may contain the hay, but wide access can still let your horse pull out a large section at once. A floor pile offers easy access, yet it also leaves every stem exposed to bedding and stall traffic.
The cost is bigger than a few minutes with a manure fork. Hay that ends up mixed into the stall adds to the amount you sweep, strip, and replace. Refilling too often interrupts the rhythm of feeding and makes it harder to see how much hay your horse has actually consumed. You want a setup that respects your horse’s natural tendency to eat over a longer period without turning each meal into another barn chore. The real challenge is finding a rack that contains a practical serving, moderates access, fits neatly into the stall, and avoids harsh exposed edges around your horse.
Why It Keeps Happening
Open Access Can Turn a Hay Rack Into a Brief Holding Spot
The problem isn’t that you’re feeding carelessly, and it isn’t that your horse is unusually messy. Many conventional feeding setups ask you to choose between unrestricted access and containment. Loose hay is easy to serve but easy to scatter. A basic rack keeps the flakes elevated, yet widely spaced bars may allow a large bundle to come free with one determined pull. Neither approach fully addresses what happens after your horse starts sorting, tugging, and nosing through dinner.
When access is too open, the rack can become little more than a temporary holding spot. Your horse pulls out more hay than can be comfortably eaten at once, and the extra lands below. Once those stems are mixed with shavings, damp spots, or manure, you have to decide whether to discard them. You may compensate by offering another flake, checking the stall more frequently, or sweeping scattered hay back into a pile. That creates a frustrating cycle: serve, scatter, clean, refill, and repeat—without knowing whether the rack is genuinely slowing the meal or simply storing it for a few minutes.
Construction details matter, too. A feeder occupies the same stall space where your horse turns, rests, eats, and investigates anything within reach. Awkward corners, exposed rough points, or an oversized footprint can make a seemingly simple accessory harder to live with every day. Meanwhile, a rack that is too small demands frequent filling, while one that releases hay too freely does little to reduce the mess. You’re left searching for a practical middle ground: enough capacity for a routine feeding, controlled access that encourages a longer eating period, and a corner-friendly shape designed with your horse’s space in mind.
When access is too open, the rack can become little more than a temporary holding spot. Your horse pulls out more hay than can be comfortably eaten at once, and the extra lands below. Once those stems are mixed with shavings, damp spots, or manure, you have to decide whether to discard them. You may compensate by offering another flake, checking the stall more frequently, or sweeping scattered hay back into a pile. That creates a frustrating cycle: serve, scatter, clean, refill, and repeat—without knowing whether the rack is genuinely slowing the meal or simply storing it for a few minutes.
Construction details matter, too. A feeder occupies the same stall space where your horse turns, rests, eats, and investigates anything within reach. Awkward corners, exposed rough points, or an oversized footprint can make a seemingly simple accessory harder to live with every day. Meanwhile, a rack that is too small demands frequent filling, while one that releases hay too freely does little to reduce the mess. You’re left searching for a practical middle ground: enough capacity for a routine feeding, controlled access that encourages a longer eating period, and a corner-friendly shape designed with your horse’s space in mind.
- ✗Loose hay can be nosed, stepped into, and mixed with bedding.
- ✗Large pulls can send more hay to the stall floor than your horse eats at once.
- ✗Scattered stems make it harder to see how much hay remains.
- ✗Frequent cleanup and refilling can interrupt the barn routine.
The Solution
Tapered Bar Spacing Helps Moderate Each Pull
The Easy-Up® Safety First Corner Hay Rack addresses the problem by combining containment with more controlled access. Instead of leaving full flakes loose on the stall floor, it holds hay within a dedicated corner-mounted rack. The closer bar spacing is designed to limit how much hay your horse can pull free at one time, supporting a slower, more prolonged way of eating. As your horse works hay through the bars, more of the serving remains contained rather than dropping into the bedding all at once. Smooth, rounded edges also keep the construction horse-conscious where your horse reaches in to eat.
Its shape and capacity are built around daily stall use. The rack holds approximately three flakes of hay and measures 30 inches high and 23 inches deep at the top, tapering to 12 inches deep at the bottom. That tapered profile uses corner space while providing room for a practical serving. The rack is mountable, allowing its placement to be planned around your stall layout and your horse’s feeding area.
For your horse, the difference is a feeding setup that asks for smaller pulls instead of offering an entire loose flake at once. Your horse can continue working through the hay over a longer period while the remaining portion stays gathered in the rack. The rounded-edge design supports a smoother feeding area, and the corner configuration helps preserve usable stall space. It is a straightforward mechanical solution: contain the hay, moderate access through the bars, and give your horse time to work through the serving.
For you, that can mean fewer armfuls of hay spread through the bedding, less time separating clean stems from stall waste, and a clearer view of what remains between checks. You still control how much and how often your horse is fed; the rack simply gives each serving a more orderly place to stay. The Easy-Up® Safety First Corner Hay Rack brings practical capacity, controlled access, and horse-conscious edges together in one barn-ready design—backed by equine expertise and Trusted since 1948.
Its shape and capacity are built around daily stall use. The rack holds approximately three flakes of hay and measures 30 inches high and 23 inches deep at the top, tapering to 12 inches deep at the bottom. That tapered profile uses corner space while providing room for a practical serving. The rack is mountable, allowing its placement to be planned around your stall layout and your horse’s feeding area.
For your horse, the difference is a feeding setup that asks for smaller pulls instead of offering an entire loose flake at once. Your horse can continue working through the hay over a longer period while the remaining portion stays gathered in the rack. The rounded-edge design supports a smoother feeding area, and the corner configuration helps preserve usable stall space. It is a straightforward mechanical solution: contain the hay, moderate access through the bars, and give your horse time to work through the serving.
For you, that can mean fewer armfuls of hay spread through the bedding, less time separating clean stems from stall waste, and a clearer view of what remains between checks. You still control how much and how often your horse is fed; the rack simply gives each serving a more orderly place to stay. The Easy-Up® Safety First Corner Hay Rack brings practical capacity, controlled access, and horse-conscious edges together in one barn-ready design—backed by equine expertise and Trusted since 1948.
🛡️
Slower Hay Access
Tapered bar spacing promotes a slower, more natural way of eating.
💧
Better Hay Containment
The rack keeps the serving gathered instead of leaving full flakes loose on the stall floor.
📐
Horse-Conscious Edges
Smooth, rounded edges shape the areas around your horse’s feeding access.
🔧
Corner-Friendly Profile
The tapered corner design provides practical hay capacity while using stall corner space.
PRODUCT FIT CHECKLIST
Is This Corner Hay Rack Right for Your Stall?
- You want hay contained above the stall floor.
- You prefer tapered slow-feed bar spacing.
- You want to encourage a slower, more natural eating pattern.
- You need room for a practical hay serving.
- You want smooth, rounded edges around the feeding area.
- You have a suitable stall corner for placement.
- You want to help reduce scattered and wasted hay.
Side by Side
Compare Three Corner Hay-Feeding Options
These corner-mounted products use different materials, dimensions, and access designs. Published specifications are shown without treating unlisted information as an absent feature.
| Feature | Schneiders Easy-Up® Safety First Corner Hay Rack | Tarter Poly Corner Mount Hay Feeder | Behlen Country StallMate Corner Feeder |
|---|---|---|---|
| Product format | Corner-mounted steel hay rack | Corner-mounted poly hay feeder | Wall-mounted corner hay rack |
| Published dimensions | 30 in H x 35 in W x 23 in D at top; 12 in D at bottom | 28.5 in H x 32 in W x 22.5 in L | 32 in H x 30 in L x 30 in W |
| Published hay capacity | Approximately 3 flakes | Up to 4 flakes | Not listed |
| Published construction detail | 1/2 in round steel with smooth, rounded edges | Poly construction with a rounded, smooth lip | 3/8 in smooth bars, fully welded, with powder-coat finish |
| Published feed-access detail | Current PDP lists 2 in spaces between bars; supplied Shopify description lists tapered spacing from 3.5 in to 2.5 in | Front yoke designed to provide access | Bar spacing or opening size not listed |
| Ventilation or drainage feature | Not listed | 1 in ventilation strips and removable drain plug | Not listed |
| Published product weight | Not listed | Approximately 13 lb | 17 lb |
| Installation information | Described as mountable and assembly-friendly | Specific mounting method not listed on current product page | Pre-drilled holes; manufacturer states it can be installed at the desired height |
| Warranty listed on product page | 5-year warranty | Not listed | Not listed |
A Tapered Corner Profile Built Around Daily Stall Feeding
The rack combines a corner configuration with bar spacing that narrows toward the bottom. Hay stays gathered inside while your horse works smaller portions through the bars, supporting prolonged grazing and helping reduce hay waste. Its rounded edges add a horse-conscious detail to the feeding area.
- ✓Slow-feed bar spacing that tapers toward the bottom
- ✓Smooth, rounded edges
- ✓Corner-shaped hay containment
- ✓Capacity for a practical serving of hay
- ✓Designed to promote prolonged grazing
Why Controlled Access Helps Hay Stay in the Rack
Warmth: Default Title
Size:
Color:
THE TAKEAWAY
Contain the Hay and Moderate Each Pull
This corner hay rack uses tapered slow-feed spacing and rounded edges to keep hay gathered while supporting prolonged grazing.
Ready to Order?
Bring More Order to Stall Feeding
Choose the Easy-Up® Safety First Corner Hay Rack to contain hay, moderate access through tapered bars, and support a slower feeding routine.
🚚 Free Shipping on $99+
↩️ Free Size Exchanges
🔒 Secure Checkout