4.4★ · 51 Reviews
Your Blanket's Waterproofing Just Called It Quits
BlockAide™ Blanket Reproofer revives the water repellency your turnouts need — free of PFAS and forever chemicals, made in the USA, and it lasts 3x longer than other over the counter waterproof sprays, through multiple launderings and dry cleaning cycles.
The Problem
Water Beads Off — Until It Doesn't
It’s 6:15 on a cold, rainy morning, and you’re standing at the paddock gate with one hand on your horse’s turnout. The fabric looks darker across the back and shoulders, and instead of beading on the surface, rain is spreading into broad wet patches. You bought that blanket to keep your horse dry through weather exactly like this. Now you’re wondering whether the shell is still doing its job—or whether another long day outside will leave it heavy and soaked.
Every horse owner who washes turnout gear eventually meets this moment. Mud, sweat, grooming products, ordinary wear, and repeated cleaning all challenge the water-repellent finish on the outer fabric. The blanket may still fit well. Its straps may be secure, its seams intact, and its fill perfectly usable. Yet water no longer rolls away as it did when the turnout was newer. There may be no dramatic tear or broken buckle to warn you. The first clear sign can be a shell that begins absorbing rain.
That creates an expensive question: replace a serviceable blanket, send it away for professional care, or try to restore its repellency at the barn. Replacing several turnouts can be hard to justify when the fabric, hardware, and insulation still have useful life. Sending blankets out takes time and leaves you working around pickup schedules and changing forecasts. Ignoring the problem is not appealing either, especially when your horse depends on that turnout during long stretches of wet weather.
The frustrating part is that routine cleaning and waterproofing require different jobs. Washing removes dirt and residue, but it does not automatically replace a worn water-repellent treatment. Once water stops beading, a clean blanket can still need a dedicated reproofer before it is ready to return to regular turnout.
Every horse owner who washes turnout gear eventually meets this moment. Mud, sweat, grooming products, ordinary wear, and repeated cleaning all challenge the water-repellent finish on the outer fabric. The blanket may still fit well. Its straps may be secure, its seams intact, and its fill perfectly usable. Yet water no longer rolls away as it did when the turnout was newer. There may be no dramatic tear or broken buckle to warn you. The first clear sign can be a shell that begins absorbing rain.
That creates an expensive question: replace a serviceable blanket, send it away for professional care, or try to restore its repellency at the barn. Replacing several turnouts can be hard to justify when the fabric, hardware, and insulation still have useful life. Sending blankets out takes time and leaves you working around pickup schedules and changing forecasts. Ignoring the problem is not appealing either, especially when your horse depends on that turnout during long stretches of wet weather.
The frustrating part is that routine cleaning and waterproofing require different jobs. Washing removes dirt and residue, but it does not automatically replace a worn water-repellent treatment. Once water stops beading, a clean blanket can still need a dedicated reproofer before it is ready to return to regular turnout.
Why It Keeps Happening
A Wet Blanket Isn't Just Uncomfortable — It's a Problem
The problem isn’t that you failed to care for your horse’s blanket. A turnout can be washed correctly, dried carefully, stored out of the weather, and still lose surface repellency through use. Cleaning removes the grime you can see; it does not guarantee that rain will continue to bead and roll off the outer fabric.
That distinction is where blanket care becomes confusing. General-purpose detergents can leave residue or work against water repellency, while a waterproofing product may require a specific application method, fabric condition, or drying process. Some treatments are designed as wash-ins. Others are sprayed onto wet technical outerwear. A horse blanket, however, is large, structured, and exposed to abrasion across the shoulders, back, and sides. If the product or process does not match the job, application can become uneven, impractical, or difficult to repeat across every turnout in your barn.
Then the cycle starts costing you time. You wash the blanket, wait for it to dry, apply a treatment, and clear enough space for another drying period. If rain still darkens the shell, you have to decide whether you missed an area, used too little, left cleaning residue behind, or chose a product intended for different gear. Multiply that process by several sheets and blankets, and a simple maintenance task can consume a weekend while your horse’s backup turnout stays in rotation longer than planned.
The worst part is the uncertainty at the paddock gate. A blanket can look clean and remain structurally sound while its outer treatment is no longer performing as expected. Without a clear, repeatable process, you are left testing patches, watching the forecast, and hoping the next shower beads off. You do not need louder promises. You need a reproofer with published directions, practical coverage guidance, and an application method built around horse blankets.
That distinction is where blanket care becomes confusing. General-purpose detergents can leave residue or work against water repellency, while a waterproofing product may require a specific application method, fabric condition, or drying process. Some treatments are designed as wash-ins. Others are sprayed onto wet technical outerwear. A horse blanket, however, is large, structured, and exposed to abrasion across the shoulders, back, and sides. If the product or process does not match the job, application can become uneven, impractical, or difficult to repeat across every turnout in your barn.
Then the cycle starts costing you time. You wash the blanket, wait for it to dry, apply a treatment, and clear enough space for another drying period. If rain still darkens the shell, you have to decide whether you missed an area, used too little, left cleaning residue behind, or chose a product intended for different gear. Multiply that process by several sheets and blankets, and a simple maintenance task can consume a weekend while your horse’s backup turnout stays in rotation longer than planned.
The worst part is the uncertainty at the paddock gate. A blanket can look clean and remain structurally sound while its outer treatment is no longer performing as expected. Without a clear, repeatable process, you are left testing patches, watching the forecast, and hoping the next shower beads off. You do not need louder promises. You need a reproofer with published directions, practical coverage guidance, and an application method built around horse blankets.
- ✗DWR coating breaks down a little more with every wash
- ✗Reproofing that doesn't survive the next wash means doing the job twice
- ✗A wet-through blanket is heavier, colder, and slower to dry than the fill weight you paid for
- ✗Wanting a reproofer that is free of PFAS and forever chemicals
The Solution
BlockAide™: Reproof Once, Last Three Times as Long
Schneiders® BlockAide™ Blanket Reproofer gives you a direct, spray-on way to re-waterproof horse blankets and sheets. Launder the turnout and dry it as normal, making sure all cleaning agents have been removed. Shake well, hang the blanket, and spray the exterior from 6" to 12" away. Let it air dry fully, and re-apply as needed. There is no mixing and no second wash cycle — the formula is ready to use, works on a wide range of natural and synthetic fabrics, and is suitable for all waterproof turnout gear.
The numbers make a barn-wide session easy to plan. BlockAide™ comes in a 32 oz. bottle, applied at 5 to 10 oz. per average size 78 waterproof blanket, which treats 3 to 6 turnouts per bottle. It offers long-lasting water and oil repellency that lasts 3x longer than other over the counter waterproof sprays, and it holds through multiple launderings and commercial dry cleaning cycles. It is free of PFAS and forever chemicals, and made in the USA.
For your horse, it means a serviceable turnout gets its repellency back instead of being retired because rain stopped beading. Because you treat the blanket while it hangs, you can see your spray pattern and work methodically around straps, gussets, and overlapping panels — shoulders, topline, and everywhere else the weather lands first.
For you, that is a routine you can repeat: wash, rinse the cleaning agents out, dry, spray, air dry. Shake well before each use, since the contents may separate. It is a straightforward way to extend the working life of turnout gear you already own — backed by equine expertise from a family-owned business trusted since 1948.
The numbers make a barn-wide session easy to plan. BlockAide™ comes in a 32 oz. bottle, applied at 5 to 10 oz. per average size 78 waterproof blanket, which treats 3 to 6 turnouts per bottle. It offers long-lasting water and oil repellency that lasts 3x longer than other over the counter waterproof sprays, and it holds through multiple launderings and commercial dry cleaning cycles. It is free of PFAS and forever chemicals, and made in the USA.
For your horse, it means a serviceable turnout gets its repellency back instead of being retired because rain stopped beading. Because you treat the blanket while it hangs, you can see your spray pattern and work methodically around straps, gussets, and overlapping panels — shoulders, topline, and everywhere else the weather lands first.
For you, that is a routine you can repeat: wash, rinse the cleaning agents out, dry, spray, air dry. Shake well before each use, since the contents may separate. It is a straightforward way to extend the working life of turnout gear you already own — backed by equine expertise from a family-owned business trusted since 1948.
💧
3x Longer-Lasting Protection
Exceptional water and oil repellency that outlasts other over-the-counter sprays — holds through multiple wash and dry-cleaning cycles.
🌿
PFAS-Free Formula
Free of PFAS and forever chemicals. Made in the USA, and suitable for a wide range of natural and synthetic fabrics — including all waterproof turnout gear.
🇺🇸
Made in the USA
Formulated and bottled domestically to Schneiders' quality standards — not sourced overseas.
🧴
One Bottle, Multiple Blankets
At 5–10 oz. per 78" blanket, each 32 oz. bottle treats 3–6 full-size turnouts. Simple math, real value.
Quick self-check
Is BlockAide™ the Right Product for Your Barn?
What Riders Are Saying
★★★★★
"I have used the Schneider's Blanket Reproofer for a few years now, and I always reproof the blankets, after laundering, before packing them away for the summer. Then, I give them a quick spray before use in late fall. I have had no issues with any of the blankets having lost their waterproofing. I use the Schneider's Blanket Wash first, then the Reproofer. Both products are excellent and keep the blankets in very good condition."
✓ Verified Buyer
★★★★★
"Solid product: waterproofed all my blankets after washing! Clean, no spots left after spraying: does its job!!"
✓ Verified Buyer
★★★★★
"Thus worked well in renewing the water proofing."
✓ Verified Buyer
Side by Side
How BlockAide™ Compares for Reproofing Gear
These products all restore water repellency, but their intended uses, application methods, coverage guidance, and drying directions differ. “Not listed” means the cited manufacturer or retailer page did not publish that specification.
| Feature | Schneiders Schneiders® BlockAide™ Blanket Reproofer | Nikwax Rug Proof™ | GEAR AID Revivex Durable Water Repellent |
|---|---|---|---|
| Published intended use | Waterproof horse blankets, sheets, and turnout gear | Waterproof horse blankets and pet beds | Technical outerwear and gear, including rainwear, ski gear, waders, boots, gloves, and nylon tent flies |
| Primary application method | Ready-to-use spray applied to the blanket exterior | Wash-in; hand-wash and sponge application directions are also published | Ready-to-use spray applied to a wet or dry item |
| Condition before application | Laundered, free of cleaning agents, and dried normally | Clean first with Nikwax Rug Wash; sponge directions call for a clean blanket wetted thoroughly | Clean garment; manufacturer permits application while wet or dry |
| PFAS status | Listed as PFAS-free | Listed as PFAS-free and PFC-free | Listed as PFAS-free with zero fluorocarbons |
| Published container sizes | 32 fl oz | 1 liter and 5 liters | 5 fl oz, 10 fl oz, and 16.9 fl oz |
| Published horse-blanket usage or coverage | 5–10 fl oz per average 78-inch blanket; stated to treat 3–6 turnout blankets | 17 fl oz/500 ml per blanket | Not listed |
| Drying directions | Allow the blanket to air-dry fully | Dry according to the blanket instructions; no heat is required to develop the treatment | Air-dry for 24 hours or machine-dry on medium heat if the care instructions allow |
| Published repellency scope | Water and oil repellency | Water repellency while maintaining breathability | Repels water, dirt, and stains |
| Published wash-persistence statement | Stated to last through multiple launderings and commercial dry-cleaning cycles | Not listed | Stated to remain after a wash |
| Country of manufacture | United States | Not listed on the cited manufacturer page | Germany |
What's in the Bottle — and Why It Matters
BlockAide™ uses a ready-to-use waterproofing formula that bonds to both natural and synthetic fabrics. Launder your turnouts first — remove all cleaning agents — then hang and spray the exterior from 6–12 inches away. Let fully air dry and re-apply as needed. At 5–10 oz. per average 78" blanket, one bottle goes a long way. The formula is free of PFAS and forever chemicals, so you're not trading waterproofing for a different kind of problem. Shake well before each use.
- ✓32 oz. bottle treats 3–6 average-size turnout blankets (replace with product photo)
- ✓PFAS-free: no forever chemicals in the formula
- ✓Exceptional water and oil repellency lasts 3x longer than standard OTC sprays
- ✓Holds through multiple launderings and commercial dry-cleaning cycles
- ✓Works on all natural and synthetic waterproof turnout fabrics
Reproof Once. Stay Dry All Season.
Warmth: 32 oz
Size:
Color:
The Takeaway
One bottle before blanket season is the cheapest insurance policy your turnouts will ever have.
BlockAide™ restores DWR waterproofing that holds through repeated washings — PFAS-free, USA-made, and simple to apply in minutes. At $34.99 for up to six blankets, the math is easy.
Ready to Order?
Your Blankets Work Hard. Keep Them Ready.
BlockAide™ Blanket Reproofer is $34.99 per 32 oz. bottle — enough to treat 3–6 turnout blankets. Orders over $99 ship free. Every Schneiders® purchase is backed by our Perfect Fit Guarantee. Stock up before the season starts and your blankets will be ready when the weather isn't.
🚚 Free Shipping on $99+
↩️ Free Size Exchanges
🔒 Secure Checkout